Photo Gallery

REAL ESTATE • SELLS AT 6:00 PM

TRACT 1 • OPTION #1

This is a 5.2 acre tract of bare land approx. 210' frontage x 865' deep.

TRACT 2 • OPTION #2

This is 12.2 acres which includes Tract 1 and an additional 7 acres and a pond located just to the west of Tract 1.

12:00 NOON • PERSONAL PROPERTY • 12:00 NOON

EXCAVATOR • SKID LOADERS • BACKHOE • TRENCHER • TRUCKS • SCAFFOLDING
POWER THREADER • SHOP & WOODWORKING EQUIPMENT • MISCELLANEOUS

Gehl model CTL #60 track skid loader w/materials bucket, fork bucket & only 1425 hrs., SN 21308883; Gehl model 5635 diesel skid loader w/various attachments including bucket, forks, backhoe w/2 buckets, this unit sells complete & also has a set of tracks on the wheels, less than 200 hrs., approx. 6000 hrs. or less; Kubota model KH191, 22' pads, tracks, S/N 10215, 36" bucket & other 24" bucket, original paint, 4235 hrs.; Ditch Witch model 4010 trencher w/A420 backhoe, there is 2" added to chain, it will dig approx. 7'D, 40" bucket, diesel engine, 620 hrs., S/N 6D0306, has frost proof extensions up to 12" W; Case 580C Extend-a-Hoe backhoe w/36" & 24" bucket & frost tooth, 2WD, 7500 hrs.; 1978 International S2600 tri-axle dump truck w/16' bed, wooden sides, good rubber throughout, 350 Cummins engine, approx. 125,000 mi., runs well, no air, 9 over trans., this truck was a lime truck which is why it has extremely low hours, one nice truck, just passed DOT; 1984 Chevrolet C70, single axle flatbed truck w/pump hoist attachment, only 20,000 actual miles, fire truck, 27 gas engine, manual trans.; Load-Trail tandem axle hitch pull 20' w/beavertail & ramps; very nice Edge power post driver, could be made into 3 pt., presently set up to fit front of skid loader; laser alignment system, laser beacon model LB-10 w/depth master model 200 magnet mounted receiver; box blade flared tooth skid loader attachment, plow in mound systems; Nice Woods model RB850 hyd. swivel 3 pt. tractor blade; Set of forklift forks; (12) Assorted lengths steel bar joists; JD model LT160 automatic hydrostatic lawn tractor w/42" deck; Shopsmith lathe/drill press combination complete with lathe knives, band saw, 6" sander, 4" joiner; very nice Powermatic contractor's type 10" table saw with approx. 36" table extension; nice single bag Delta dust collector; approx. 4000 watt portable generator w/8 hp engine on cart; varied air tools, electric hand tools, sawzall & more; pipe clamps; carpet seamer; 48' semi drop deck bed, undercarriage gone, used for storage, w/ rear access door & 2 overhead side doors; various aluminum extension ladders; 16 sections of Safe-Way scaffolding incl. connectors, casters, all mounted on a trailer to be sold as one; Ridgid pipe vise; 3 Ridgid pipe wrenches up to 4'; varied shop levels; manual hand held pipe threader w/dies; Ridgid pedestal pipe holder; nice Ridgid model 535 power single phase pipe threader w/ varied dies; Ridgid adjustable up to 5" pipe threader; 2 hay rack wagons on factory gears, one has bad floor; dump truck bed approx. 12-14', just the bed only; 1993 Toyota 100 pickup truck; nice Little Giant 40' wide double chain elevator w/gas engine or PTO; 2007 Chevrolet flatbed half ton pickup w/engine, a lot of body damage, primarily for parts or scrap; nice acetylene torch set w/tanks, cart, gauges, etc.; horizontal light duty band saw; variable speed Craftsman 1 hp floor model drill press; heavy duty double wheel grinder; receiver 7" swivel heavy duty vise fits on back of a vehicle; approx. 5 ton floor jack; abrasive chop saws; nice 3" gas powered trash pump w/Briggs gas engine; wall full of varied pigeon holes of plumbing parts: brass, galvanized, black, plastic; Honda driven approx. 50 gal. poly tank spraying cart w/booms; approx. 100' sprayer, hose reeler w/small cable trailer, made for gardens; heavy duty approx. 4 stage dump truck hydraulic hoist incl. pump & reservoir; 4x8 lettered arrow sign free standing w/letters; chisel plow set up for skid loader for drip irrigation or plowing septic systems; pile of about 30, approx. 8' telephone poles for fence posts; 2 GMC flatbed 1 ½ ton trucks, one is 50 one is 60, gas engines, engines ran but been parked for long time; 7 varied Western saddles, from kids up to 15"; leather driving harnesses for ponies; misc. horse tack; 2 varied bicycles & nice Schwinn tandem bicycle built for 2; Rockwell 10" contractor's table saw; varied adjustable hospital beds; approx. 16' wooden wall store unit, from Community Center Store w/approx. 10' top shelf; wheelchairs; TG-Lift chair or handicap cart lift to fit in a 1" receiver; & much, much more.