Photo Gallery

REAL ESTATE TO SELL AT 6:00 P.M.

TIPPECANOE VALLEY SCHOOLS

General Information:

These 20 acres have a very large older Victorian style home, Lg. Garage & shop area & apple processing bldg. The house is approx. 1275 Sq. ft. on each floor. The house needs a lot of rehabilitation & upgrading but there is a lot of house here. It is heated by wood, has 3 or more bedrooms & other varied rooms. There is a 4" well. There is a newer apple processing building built in 2005. It is 36' x 42'. There is also a 24' x 22' detached garage with a 24 x 30 additional storage building. The apple trees have not been cared for a couple of years but with trimming & spray, could be productive again. The remaining land is presently in corn and looks great.

Taxes: $1,678.54

If you can handle work & want a 20 acre farmette close
to Warsaw, be a bidder on this great opportunity.

PERSONAL PROPERTY Sells at 2:00 p.m.

Ford 4000 Narrow front power steering, Select-O-Speed, good rubber, 3 pt. tractor, has not run for some time; 3 pt. double disk, 3 furrow unit to mount up to dirt; Blackhawk 900 lb. cherry picker; Dearborn 2-bottom 14" 3 pt. plow, hydraulic drive model 20-30 weedbadger; Berthoud Gyraspeed 260 3 pt. fogging type sprayer; 3 pt. 50 gallon Fimco gas powered sprayer; John Deere 300 riding lawn mower with deck, has not run for a long time, has been outside; 12' single axle trailer and 10" single axle tilting trailer; 1990 Chevrolet Cheyenne 4 wheel drive, full size bed pickup truck, does not run; 1996 Chevrolet Vandura 3500 dual wheel 10' cargo box truck with Kalida 1,250 lb Theiman drop tailgate; 24' x 12'pipe arch greenhouse, pipe only; All aluminum Chevrolet 19669 Cargo van, not been run for 3-4 yrs.; Varied engine blocks; Varied engines for scrap, transmissions; Older roto-hoes, older carburetors, Ariens 22" rear tine approx. 7 hp rototiller; Vandorn brake lathe; Radial arm saw; Vertical approx. 3 hp air compressor; Craftsman 6 hp floor model planer; Werner 18' aluminum extension ladder; Master 150,000 btu heater; heavy rolling welding table approx. 4' x 8'; jack stands; cartage carts; battery chargers; approx. 10' x 10' I-beam rolling A-frame; large cabinet sandblaster complete with glove holes; 20 ton hydraulic jack arbor press; 30 lb capacity Toledo approx. 10" x 12" calculating type scales; nice triple bay all stainless sink with double side wings approx. 8"' total; Tew produce sorter, grader, and washer, inside, works great; 16' aluminum single paddle elevator for moving apples; very nice stainless hydraulic cider or apple press, 28"x8' stainless trough made by Craig Welding; new approx 500 1 gallon plastic jugs, apple crates & more